MAXIEM 2080 PRECISION
.webp)
Fast, smooth, and accurate, the MAXIEM® JetMachining
Center® is ideal for the ambitious shop where new challenges
are a permanent driving force. The MAXIEM waterjet system
was developed, tested, and built in keeping with the OMAX
philosophy to deliver superior performance, expanded
versatility, and high productivity at an affordable price. Your
MAXIEM can become even more individual thanks to a
diverse selection of options, yet remains easy to use for any
level of operator. However you customize your MAXIEM,
remember that there are no limits to its potential.
The MAXIEM 2080 is versatile for nearly any material cutting need from prototyping to production.
| Footprint (with pump & controller) | 35' 1" x 12' 11" (10.69 m x 3.94 m) |
|---|---|
| Height (with scissor plumbing) | 10' 4" (3.15 m) |
| Operating Weight | 50,123 lb (22,735 kg) |
| Weight (tank empty) | 12,800 lb (5,806 kg) |
| X-Y Cutting Travel* | 27' 2" x 6' 7" (8.28 m x 2.00 m) |
| Z-Axis Travel (with Motorized Z Axis)* | 12" (304 mm) |
| Table Size | 27' 10" x 7' (8.48 m x 2.13 m) |
| Material Supports Slats | 4" x 14Ga Galvanized Steel(102 mm x 2 mm) |
|---|---|
| Maximum Supported Material Load | 300 lbs/sq ft (1,465 kg/sq meter) |
| Electrical Requirements | 3-Phase, 380-480 VAC ±10%, 50-60 Hz |
| Noise Level | Below 80 dBA at one meter for submerged cutting |
| Speed | 500 in/min (12.70 m/min) |
| Linear Positional Accuracy* | ±0.003" (±0.076 mm) |
| Repeatability* | ±0.001" (±0.025 mm) |
Standard Features
- Backed by our exclusive IntelliMAX Standard Software
- Powerful all-in-one controller computer with large 23" screen
- Standard IntelliTRAX traction drive inside the X-Y Axis beams fully enclosed inside coated steel covers
- Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
- Standard scissor-style hard plumbing
OMAX Benefits
- Designed and manufactured at the OMAX factory in Kent, Washington, USA
- Does not create heat-affected zones or mechanical stresses
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
- No tool changes & minimal fixturing dramatically reduce setup
Service & Training
- 1 year of free training
- 1 year of free software upgrades
- 1-year / 2000-hour limited warranty
- 1 day of onsite training upon installation
Features and Benefits
- this is a list item
- this is a list item
- this is a list item