VALGRO SAMARTH MICRO JOINT + SIDE EDGE + DEBURRING + FINISHING MACHINE
SAMARTH – Side edge Deburring and Finishing machine is designed to remove micro metal burr formations after cutting processes like shearing, punching, etc. It especially works on the metal side and edges deburring for removing burrs created from the sheet external perimeter. This deburring is required in some cases for aesthetic reasons, while some industrial units utilize it to round the edges for safety reasons.
Model
EDGE 9
EDGE 11
EDGE 21
Head Type
Wheel / Disc
Wheel / Disc
Wheel / Disc
Work Surface
Wall / Edge
Wall / Edge
Wall / Edge
Work Head
1
2
2
Process: Wet / Dry
Dry
Dry
Dry
Application
Burr Removal
Micro Join + Edge Burr Removal
Finish Achieved
Smooth Edge
Smooth Edge
Smooth Edge
Type of Material
Sheet Metal
Smooth Edge
Min. Max Width
300
600
600
Min. Length
100
300
300
Min. Max Thickness
0.8 to 3mm
0.8 to 3mm
0.8 to 3mm
Brush Diameter
150mm
150mm
150mm
Brush Action
Rotate / Oscilate
R
R
R
Conveyor Type
R=Roller / B=Belt
Manual
Belt / Roller
Belt
Conveyor Speed
Min / Max - MPM
Min / Max - MPM
Manual Feed
0.5 - 10
0.5 - 10
Dust Extraction:
Valgro-Duklean
Valgro-Duklean
DCS-1
DCS-3
DCS-5
Electrical parameters
The integrated frequency converter allows the machine to work worldwide with all power supply systems and enables smooth start and enhanced motor protection.
- Two Deburring wheel station is working on from side
- Top and side edge deburring by abrasive deburring wheel
- Tilt the sheet for another side burring
- Sheet Auto Feed Conveyor Transport system
- Easy abrasives tools replacement
- Emergency security switch
- Reversal conveyor speed for emergency control
- Avoid unhealthy position compared to the traditional operation
- No Physical Strain of worker by vibrations and flying spark
- Employee does not suffer under flying spark, dust and noise
- Unskilled labor run this machine
- Save money and time by less down time
Features and Benefits
- this is a list item
- this is a list item
- this is a list item